|
商品の詳細:
お支払配送条件:
|
| ネジ径: | 80mm | ねじL/D比: | 25:1 |
|---|---|---|---|
| 最高プロダクト容積: | 100 l | クランプ力: | 180 KN |
| ダイヘッドの構成: | シングル / ダブル / フォー | 金型プラテンサイズ: | 800×600mm |
| 押出容量: | 120-150 kg/h (HDPE) | 制御システム: | カラータッチスクリーン付きPLC |
| ハイライト: | 100L extrusion blow molding machine,180kN clamping force blow molder,extrusion blow molding machine 100L |
||
Large containers punish weak clamping. Above 50 litres internal pressure during blow-up pushes hard against the mould parting line, and any deflection shows up as flash that has to be trimmed by hand and a wall that is thinner on one side. The MP100FD answers that with 180 kN of clamping force spread over an 800 x 600 mm platen. The machine is built around an 80 mm nitrided screw running at 25:1 L/D, which gives 120 to 150 kg/h of HDPE throughput, enough to feed a 100 litre
コンタクトパーソン: Levi.Li
電話番号: 86-13396686968
ファックス: 86-574-81688011
